[PATCH] Fixed case sensitivity in #if defined(MACH_LPC21xx) - changed to MACH_LPC21XX - Sysless

16 Feb 2010

---
 arch/arm/mach-lpc21xx/libs/uart_zen/uart_zen.c |    5 ++---
 1 files changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm/mach-lpc21xx/libs/uart_zen/uart_zen.c b/arch/arm/mach-lpc21xx/libs/uart_zen/uart_zen.c
index 4689609..407550b 100644
--- a/arch/arm/mach-lpc21xx/libs/uart_zen/uart_zen.c
+++ b/arch/arm/mach-lpc21xx/libs/uart_zen/uart_zen.c
@@ -93,12 +93,11 @@ void UART1_irq ( void ) {
 void UART_init ( uint8_t uart_num, uint32_t baud_rate, uint32_t pclk, unsigned rx_isr_vect ) {
    uint16_t divisor = ( pclk + ( ( baud_rate * 16 ) / 2 ) ) / ( baud_rate * 16 ); // baud divisor computation
    
-
-#if defined(MACH_LPC21xx)
+#if defined(MACH_LPC21XX)
    PINSEL0 &= ( 0xFFFFFFF0 - ( uart_num * 0xEFFF1 ) ); //enable UART functionality on respective processor pins
    PINSEL0 |= ( 0x00000005 + ( uart_num * 0x4FFFB ) );
 #endif
-
+	
    UART_REG_ADDR ( U0LCR, uart_num ) = 0x83; // 8-bit data, no parity, set DLAB = 1
    UART_REG_ADDR ( U0DLL, uart_num ) = *(uint8_t *) &divisor; // write divisor lo-byte
    UART_REG_ADDR ( U0DLM, uart_num ) = *( ( (uint8_t *) &divisor ) + 1 ); // write divisor hi-byte
-- 
1.6.5


---

    